-40%
HY910-ST 5g Silicone-Based Thermal Grease Adhesive Heatsink Plaster
$ 0.94
- Description
- Size Guide
Description
DescriptionThis listing is for 1 x 5g tubes of quality high conductivity silicone thermal glue.
With a thermal conductivity greater than 0.975 w/m-k this strong silicone based glue is perfect for use with our range of high-power LEDs. This glue is also suitable for other high temperature applications such as transistor cooling. This glue is also electrically non-conductive. Please note that thermal glue is not recommended for bonding CPUs to heatsinks here you should use Thermal Grease.
This product is fully CE and RoHS compliant and provides a safe and affordable solution to safely dissipate heat away from your components directly to a heat sink. The utilisation of a good quality high thermal conductive glue/compound is essential to keep components cool, prolong their life and allow them to perform at optimal levels.
Each tube contains 5 grams of thermal glue that will suffice for the installation of around 10 x 1W / 3W LEDs with PCB directly onto a heat sink.
*Please kindly note that this is a thermal glue NOT a thermal compound and provides a near permanent bond for components.
Technical Specifications
Colour White -
Thermal Conductivity 0.975 W/m-K
Hardness 78±5 -
Specific Gravity 2.3g/cm²
Tensile Strength 2.1Mpa
Dry Time 5-15 Mins
Elongation At Break 70%
Shear Strength 1.8Mpa
Dielectric Strength 10KV/MM
Operation Temperature -600 -200°C
Ingredient Percentage Composition
Crossing Agent 10%
Silicone Material 30%
Thermal Conductive Material 40%
Strength Fillers 20%
Package contains:
1 X Halnziye HY910 5g conductivity silicone thermal glue.